pH Electrode Accessories
Abcam Fulvic acid, colloidal poly-electrolyte, 5MG
MW 308.24 Da, Purity >95%. Cell-permeable colloidal poly-electrolyte. Can act as an electron donor or acceptor / oxidizer or reducer. Inhibits aggregation and promotes disassembly of tau fibrils. Shows broad-spectrum antibacterial activity in vivo. .
The product is subject to the following: Abcam Restricted Use Statement
Grainger pH Electrode Epoxy BNC Round Tip
The Grainger 16Y968 is a 3M Scotch-Brite General Purpose Hand Pad that can be used for a variety of cleaning applications. This 8" x 4" x 1/2" hand pad has an open web construction with abrasive particles throughout for scrubbing and scouring. It is made of nylon and synthetic fibers with mineral abrasive. The pad is durable, rinses easily, and can be used wet or dry on a variety of surfaces including pots, pans, dishes, floors, walls, and more. The abrasive level is medium duty. This versatile cleaning pad tackles tough messes while being gentle on surfaces.
Grainger pH Electrode Glass BNC Round Tip
The SensoRex pH Electrode pH 16Y981 is a gel-filled pH electrode with a glass body and epoxy body gel filled reference. It has a 12 mm diameter pH bulb and internal temperature sensor. The electrode has a BNC connector and 1 m cable. It has a 3/4" NPT thread mounting and is suitable for water, wastewater and environmental applications. The electrode has a pH range of 0-14 pH, temperature range of 0-80°C, and 12 bar pressure range. It provides accurate pH measurement.
Grainger pH Electrode Glass BNC Round Tip 6mm Dia
The 16Y992 is a 3M Scotch-Brite General Purpose Hand Pad, 6" x 9", Very Fine grade, from 3M's Surface Preparation line. It features an open web construction and is made of high quality fibers in a nonwoven web material. This durable hand pad has an abrasive on both sides for scrubbing and cleaning. It effectively removes rust, scale, dried paint, and more from metal, fiberglass, plastic and other surfaces without scratching. The very fine grade pad is versatile for light duty scrubbing and finishing.
Grainger pH Electrode Ryton PPS BNC Round Tip
The SensoRex pH Electrode pH 16Z007 is a pH electrode designed for general purpose use. It has a glass body, epoxy body material, gel electrolyte, and a BNC connector. The electrode has a pH range of 0-14 pH, a temperature range of 0-80°C, and a 12 mm diameter x 120 mm length. It has a fast response time and is compatible with most pH meters. The electrode requires storage solution and regular calibration for accurate measurements. Overall, it provides accurate, reliable pH measurements for laboratory and industrial applications.
Grainger pH Electrode Epoxy DINM/C3 Round Tip
The SENSOREX S294C is a pH electrode with a glass body and gel-filled reference. It has a double junction reference with a ceramic pin junction and sleeve junction. The electrode has a conical tip, 12 mm diameter glass body, and BNC connector. It has a pH range of 0-14 pH, temperature range of 0-80°C, and reference electrolyte of 3.8M KCl. The S294C is designed for laboratory, industrial, and municipal water applications. It has a fast response time and stability in fluctuating samples. The double junction reference design minimizes contamination.
Grainger pH Electrode Epoxy BNC/8 pin DIN
The Grainger 16Y993 is a 3M Scotch-Brite General Purpose Hand Pad that can be used for cleaning and scouring. It features an open web construction with non-scratching fibers that are ideal for cleaning pots, pans, dishes, countertops, sinks, showers, tubs, fiberglass, porcelain, stainless steel and other surfaces. This versatile scouring pad measures 6 inches by 9 inches and comes in a pack of 10. It is durable, lint-free and resists tearing during use. The open web design allows dirt and grime to pass through the pad during scrubbing.
Grainger pH Electrode Epoxy BNC Flat Tip 15mm Dia
The Grainger 16Y969 is a 3M Scotch-Brite General Purpose Hand Pad that can be used for a variety of cleaning applications. This 8" x 4" hand pad has an open web construction that allows it to conform to surfaces. It is made of nylon and synthetic fibers that are non-scratching on most surfaces. The pad is durable, rinses easily, and can be used wet or dry for scrubbing, wiping and polishing. It works well on glass, tile, stainless steel and other hard surfaces. The 3M Scotch-Brite General Purpose Hand Pad provides versatile cleaning performance.
Grainger pH Electrode Ryton PPS TNR Flat Tip
The Ryton PPS TNR Flat Tip pH Electrode from DID Inc. is a flat tip pH electrode made of Ryton PPS plastic. It has a double junction Ag/AgCl reference with a ceramic pin junction and features a flat sensing surface for direct contact measurement. This electrode has a 12 mm diameter body, 120 mm length, BNC connector, and 3 m cable. It has a pH range of 0-14 pH, temperature range of 0-80°C, and reference impedance of <500 MΩ. This durable electrode is designed for direct contact measurement in soils, emulsions, slurries, and semi-solids.
Grainger pH Electrode Epoxy BNC Round Tip
The Grainger Approved pH Electrode is a gel-filled, combination electrode designed for general purpose pH measurements. It has a glass body and epoxy body material with a single junction reference. The electrode has a 12 mm diameter pH bulb and is compatible with pH 0-14 measurement range. It has BNC connector type and impedance of less than 600 MOhm. The electrode is maintenance free with no refilling required. It can be used for water, wastewater, food processing and other aqueous solutions. The electrode requires a pH/ORP meter for operation.
Grainger pH Electrode Glass BNC Round Tip
The SensoRex pH Electrode pH 16Y991 is a gel-filled, combination pH electrode with a glass body and epoxy body gel filled reference. It has a 12 mm diameter pH bulb and internal Ag/AgCl reference electrode. The electrode has a BNC connector and 1 m cable. It has a 3/4" NPT thread mounting and is suitable for laboratory, industrial, and municipal water applications. The electrode has a pH range of 0-14 pH, temperature range of 0-80°C, and reference impedance of <300 MOhm.
Grainger pH Electrode Epoxy BNC Round Tip
Grainger is a leading industrial supply company offering over 1.5 million products from thousands of trusted MRO suppliers. They provide products and services to help keep facilities up and running. Grainger offers a wide selection of equipment, tools, lighting, safety supplies, and more. Their website allows customers to easily search and find MRO products for their business. Grainger focuses on fast, reliable shipping and has over 300 branches nationwide. They aim to provide an exceptional customer experience.
Grainger pH Electrode Epoxy BNC Round Tip
The Grainger Approved pH Electrode is a combination electrode designed for general purpose pH measurement. It has a glass body, epoxy body material, gel electrolyte, and a BNC connector. The electrode has a pH range of 0-14 pH, is compatible with aqueous solutions, and has a temperature range of 0-80°C. The electrode has a 12 mm diameter x 120 mm length. It should be stored in pH 4 buffer solution.
Grainger Replacement Electrolyte CLD
The SENSOREX CLDA-4015 is a replacement electrolyte solution for SENSOREX chlorine dioxide analyzers. It is used to refill electrolyte cells in CLDA Series chlorine dioxide analyzers after the initial fill has been depleted. This 500 mL bottle of electrolyte solution is manufactured by SENSOREX to properly replenish electrolyte cells in their chlorine dioxide measurement equipment. The electrolyte solution enables accurate measurement of chlorine dioxide levels in water treatment applications. It has an operating temperature range of 32-122°F.
Grainger pH Electrode Epoxy BNC Flat Tip 12mm Dia
The Grainger Approved pH Electrode is a glass body combination electrode designed for general purpose pH measurements. It has a 12 mm diameter pH bulb and gel filled outer body. The electrode has a BNC connector and 1 m cable. It has a 3.5M KCl electrolyte solution. The electrode measures pH 0-14 and has a temperature range of 0-80°C. It has a response time of 95% in 1 minute.